Ring doorbells and security cameras are out in all weather, whether it’s hot and sunny or cold and wet.
But is a Ring doorbell waterproof? While doorbells from Ring are water-resistant, they are not fully waterproof.
In this guide, we find out whether a Ring doorbell can get wet and how you protect your video doorbell from humid conditions.
Are Ring Doorbells Waterproof?
No, Ring doorbells aren’t waterproof and you shouldn’t submerge them in water. Make sure that you keep water away from your Ring device.
You should avoid spraying your video doorbell with high-pressure water as the electronics inside the doorbell can get damaged by moisture.
Plus, ensure that you install your Ring video doorbell under a protective overhang. This keeps the majority of direct rain, hail and snow away from the doorbell.
This being said, all Ring doorbells and Ring video security cameras are water-resistant which means that they can withstand a small amount of water.
Can Your Ring Doorbell Get Wet?
No, it is essential that your Ring doorbell system doesn’t get too wet. While the doorbell is water-resistant and designed for outdoor use, it cannot handle a large amount of water.
There is always a small risk that the device could get damaged by moisture in the air and rain.
That’s why you should place your Ring doorbell under a roof where it’s protected from the weather.
Does Rain Damage A Ring Camera?
Yes, a direct downpour on your Ring doorbell or security camera may damage the electronics inside the device.
While a Ring camera is water-resistant, it cannot withstand snow, rainfall, hail or strong winds.
This means that submerging the camera in water or spraying it with water might cause the camera to stop working.
Why Is My Ring Camera Blurry After Rain?
Your Ring doorbell or camera may be fogging up because of different temperatures and humidity outside.
When the humidity increases, then condensation gathers on the cool surface of your camera lens. This makes the smart camera blurry.
There are a couple of different options to prevent fogging of your Ring camera and doorbell, including anti-fog coating and repositioning your device.
What Happens When Your Ring Doorbell Gets Wet?
It’s commonly known that electricity and water don’t mix well.
In fact, when water gets into the electronics of your doorbell, then this could cause a short circuit in your device causing it to malfunction.
Depending on your doorbell system and the wiring in your home, water can also blow a fuse or trip your breaker.
While this isn’t specifically dangerous, it’s still not ideal as you may need to replace the fuse and the Ring doorbell itself.
However, water in other parts of your electrical system can also lead to a power outage and electrical fire.
Plus, you may be at risk of an electric shock if you touch an exposed wire.
How To Protect Your Ring Doorbell From Rain
While there is never a 100% guarantee that your Ring doorbell or security camera is fully protected from the weather, there are a few things you can do to minimize the risk of water exposure.
Install The Doorbell Under A Roof
One of the best ways to keep your Ring doorbell system safe from the worst of the weather is by installing it in a sheltered location.
This could be under an awning, a porch or a roof to ensure that the camera isn’t directly out in the open.
Bring Your Doorbell Inside
Although the right doorbell camera placement is important, it doesn’t provide a full guarantee that the lens won’t frost or fog.
In humid climates, the combination of warmer temperatures and greater air humidity means that moisture builds up more easily on your doorbell camera.
You may not even notice the moisture immediately unless it appears on the camera lens.
As prolonged moisture can damage your camera system, make sure that you regularly check your doorbell camera for internal fogging and moisture.
You can then simply wipe the water condensation away with a tissue or a towel.
Weather Proof Coating
There is no way to fully protect your Ring doorbell from moisture or water, especially if you live in a humid area.
However, you can make sure that you don’t expose the doorbell to direct water. But what if you need to install your camera in a location that’s not sheltered from the weather?
You can try to apply a water-repellent solution that creates a waterproof coating on the camera case. This allows the water molecules to slide off the camera, keeping it dry.
Wrap A Silicone Sleeve Around The Doorbell
Silicone is a fantastic waterproof material that you can wrap around your doorbell camera casing to protect it from water, cold and extreme temperatures.
The sleeve keeps the internal temperature of your doorbell camera steady, so there is no frosting or fogging.
Doorbell Camera Cases
If you don’t want to use a silicone sleeve or a water-repellent spray, then you can put your Ring doorbell camera into a protective casing.
Just make sure that the case is fully waterproof, so there is no moisture trapped inside it.
Install A Heat Trace Tape
Another great alternative to keep the temperature of your Ring doorbell system steady is by installing a heat trace tape.
This is a type of cable or tape that heats up to a certain temperature, keeping the case of your doorbell warm enough, so it can operate at its optimal temperature levels.
These types of heat tapes contain a thermostat that traces the outside temperature and adjusts to any temperature increases and decreases.
Final Thoughts
No Ring doorbell or Ring security camera is fully waterproof which means that these devices should not come into direct contact with water.
However, they are water-resistant, so they can withstand light water spray.
This being said, it’s best to keep any type of water and moisture away from your doorbell device to ensure that it lasts for as long as possible.